The Occupational Safety and Health Administration (OSHA) releases a list each year of the most frequently cited violations. Knowledge of these violations can assist you in identifying and correcting similar risks in your company.
In November 2015, Congress enacted legislation requiring federal agencies to adjust their civil penalties to account for inflation. OSHA citation fees increased seven-fold in 2016 and will continue to go up with annual inflationary adjustments. The increase from 2019 to 2020 was 1.8%.
If you assess your safety program with an emphasis on correcting these commonly cited hazards, and you will be safer and save money in penalty fees!
Here are a few tips for mitigating some of the most frequently cited hazards associated with 3 of OSHA’s Top 10 citations. For the complete list, please watch my webinar presentation.
Falls continue to be the leading cause of death in the construction industry accounting for over 33% of fatalities. Almost two-thirds of fall accidents are from roofs, ladders, and scaffolds.
The construction industry is a unique place to work, with job site conditions changing from day-to-day or even hour-to-hour. Fall exposures are frequent and varied. This safety challenge can be met with success if we pay attention to OSHA’s requirements under the “Fall Protection Standard (1926 Subpart M)”, “Scaffolds (1926 Subpart L),” and “Stairways and Ladders (1926 Subpart X)”.
Additional information and resources for Fall Protection can be found here:
Eye and Face Protection
Conduct a hazard assessment and identify those work tasks that require eye and face protection to guard employees from hazards like flying particles, chemicals, or optical radiation. Your assessment must include evaluation of exposures to both the employee performing the task or job, as well as other employees that might be working in the same area. These assessments will help you choose the correct eye and/or face protection to help prevent eye and face injuries. Keep in mind, normal prescription eyewear does not provide protection from impact or penetration hazards. To provide appropriate protection, prescription eyewear must be manufactured per the requirements of the “American National Standards Institute, ANSI Z87.1”. Otherwise, you could provide “wear-over” type eye protection.
Eye and face protection requirements are addressed in OSHA’s Construction Industry under the “Personal Protective and Lifesaving Equipment Standard, 1926 Subpart E“.
The Hazard Communication Standard (HCS) helps employers classify and identify chemical hazards and controls for safe use. It’s basically chemical safety in the workplace. Employers need to ensure that their employees understand the hazards presented by the chemicals they’re using, AND most importantly, what measures must be taken to prevent injury while using these chemicals.
Safety Data Sheets (SDS) for each chemical must be readily available to all employees and updated as needed. SDS contain important information from the manufacturer regarding the chemical hazards and safeguards.
Watch for improperly labeled or unlabeled containers. Accurate and compliant labeling will contain the following information:
- The product identifier, i.e. the name of the chemical
- The manufacturers’ name and address
- A “Signal Word” to quickly ascertain the level of hazard, either “Danger” or “Warning.”
- A “Hazard Statement” that describes the nature of the hazard(s), e.g. “causes serious eye damage”
- A “Precautionary Statement(s)”, e.g. “wear appropriate eye protection”
- And a “Hazard Information” pictogram(s)
Here is a great resource for employers to ensure compliance with “OSHA’s Hazard Communication Standard.”
Hazard identification and control are key components of a successful safety program. Taking a closer look at OSHA’ s annual list of their Top 10 Most Frequently Cited Violations and appropriate measures to avoid them will help you in your ongoing safety efforts. For more information please click the links below to watch the webinar or download the slide presentation.
- Affordable Care Act and Benefits Compliance Part 2: Safe Harbors
- Affordable Care Act and Benefits Compliance: A Refresher
- Health Plan Transparency Requirements Coming in 2022
- How to Help Your Employees Combat Zoom Fatigue
- Adapting to Changing Workforce Trends in a Post COVID-19 Environment
- Promote Healthy Eating in the Workplace
- Top Safety Measures to Avoid Heat Illness in the Workforce
- Why Simplifying Employee Benefits Information Is Important
- Optimize Your Employee Wellness Program
- OSHA’s Walking-Working Surfaces Standard and Fall Prevention